Manual Description
Most of these incidents can be repaired by repositioning the component or applying urethane tape to the contact area. Hood striker out of adjustment These noises can be difficult to isolate since they cannot be reached from the interior of the vehicle. The best method is to secure, move or insulate one component at a time and test drive the vehicle.
Repairs can usually be made by moving, adjusting, securing, or insulating the component causing the noise. This system includes seat belt switch inputs and dual stage front air bag modules. This vehicle is equipped with a push-button ignition switch and a steering lock unit.
If the battery is disconnected or discharged, the steering wheel will lock and cannot be turned. K If turning the steering wheel is required with the battery disconnected or discharged, follow the procedure below before starting the repair operation. Next, dip the cloth in fresh water, then squeeze ing the stain, wipe with a soft dry cloth.
Manual Cover
General