Manual Description
This vehicle is equipped with a push-button ignition switch and a steering lock unit. If the battery is disconnected or discharged, the steering wheel will lock and cannot be turned. If turning the steering wheel is required with the battery disconnected or discharged, follow the procedure below before starting the repair operation.
When the repair work is completed, re-connect both battery cables. If any of the following symptoms are noted, replace the wheel hub assembly. Remove the brake caliper, pads and torque member as an assembly using power tool.
Remove the rear wheel sensor, then move it away from the wheel hub assembly. Remove dust cap from back side of wheel hub assembly.
Manual Cover
General