Manual Description
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow. When engine is running, the high and low parts of the teeth cause the gap with the sensor to change. Intake manifold runner control valve is mounted each port of the F intake manifold and opened/closed by the intake manifold runner control valve motor.
Intake manifold tuning valve is used to control the suction passage of the intake manifold tuning system. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range. The exhaust gas components diffuse through the diffusion layer at the sensor cell.
An electrode layer is applied voltage, and this current relative oxygen density in lean. Under normal conditions the heated oxygen sensor 2 is not used for engine control operation. Cooling fan operates at each speed when the current flows in the cooling fan motor.
Manual Cover
General