Manual Description
G The seat belt pre-tensioner should be replaced even if the seat belts are not in use during the collision in which the air bags are deployed. Check that the seat belt retractor, seat belt anchor and buckle bolts are tightened firmly. Check the shoulder seat belt guide and shoulder belt height adjuster for front seats.
Check that guide swivels freely and that webbing lays flat and does not bind in guide. If the seat belt does not return smoothly, wipe the inside of the loops with a clean paper cloth. Dirt build-up in the loops of the upper anchors can cause the seat belts to retract slowly.
If the webbing does not return smoothly, the cause may be an accumulation of dust or dirt. Hold the seat belt at the center pillar webbing opening with a clip or other device. Hold both ends of the wire and pull it O tightly while moving it up and down several times along the webbing opening surface to remove dirt stuck there.
Manual Cover
General