Manual Description
Remove the old sealant adhering to the mating surface. Remove the sealant completely from the groove, bolts, and bolt holes. Thoroughly clean the mating surface removing any adhering moisture, grease and foreign material.
Apply the sealant without breaks to the specified location with the specified dimensions. Occasionally, it should be applied outside the holes. Within five minutes of sealant application, install the mating component.
After 30 minutes or more have passed from the installation, fill the engine with the proper oil and coolant. If the engine oil level is out of range, add oil as necessary. F If the engine oil is milky, it is highly probable that it is contaminated with engine coolant.
Manual Cover
General