Manual Description
Serious burns could occur from F high-pressure engine coolant escaping from the radiator or reservoir. To check for leakage, using suitable tool apply pressure to the cooling system and reservoir cap. Serious burns could occur from high-pressure engine coolant escaping from the radiator.
Replace the cap if the metal plunger cannot be seen around the edge of the black rubber gasket. Replace the cap if deposits of waxy residue or other foreign material are on the black rubber gasket or the metal retainer. Use compressed air lower than 490 kPa (5 kg/cm2 , 71 psi) and keep distance more than 30 cm (11.
Blow air again into all the radiator core surfaces once per minute until no water sprays out. Drain engine coolant so that no engine coolant comes out from water pump fitting hole. Engine coolant will leak from the cylinder block, so have a receptacle ready below.
Manual Cover
General