Manual Description
The line pressure switch determines whether or not adequate line pressure has built up under different operating conditions. Signal voltage from throttle position sensor is abnormally Throttle position sensor high. Note 2: When the wait detection switch has been properly fixed, malfunction information is erased from the memory.
When there is nothing wrong with the electrical system, check the hydraulic system. However, be careful when changing the values because it may adversely affect driving performance. It is important to fully understand the symptoms or conditions for a customer complaint.
Put a matching mark on top of the front drive shaft in line with the mark on the companion flange. Install the oil seal until it is flush with the end face of the front case, using Tool. K Install the air breather hose into the air breather (metal connector) and actuator (case connector) until the hose end reaches the base of the tube.
Manual Cover
General