Manual Description
The indicated temperature on the thermometer is not readily affected by engine heat. Check harness for open or short between ambient sensor 2 and temperature is between compass and thermometer. Pushing the Mode switch for about 10 seconds will enter the initial correction mode.
When the combination meter receives light warning signal, it sounds warning chime. When the combination meter receives the seat belt warning signal, it sounds the warning chime. Check voltage between combination meter harness connector M24 terminal 27 and ground.
This signal is reflected back to the sensor by objects large enough and close enough to be detected. The rear sonar sensors measure the time from the transmitted signal to the time the signal is reflected back and sends this information to the sonar control unit. Power is supplied from sonar control unit terminal 16 to each rear sonar sensor terminal 1.
Manual Cover
General