Manual Description
Apply anti-corrosive oil to the threads of the drive pinion and the seating surface of the new drive pinion lock nut. If the total preload torque exceeds the specifications, replace the collapsible spacer and tighten it again to adjust. Insert the side flange until the serrated part of the side flange has engaged the serrated part of the side gear and remove the Tool.
Remove the carrier cover bolts and separate the carrier cover from the gear carrier using Tool. Also remove any moisture, oil, or foreign material adhering to the application and mating surfaces. Remove the rear drive shafts from the rear final drive assembly M and support them using suitable wire.
When installing the breather hose insert the plastic end of the breather hose into the hole in the suspension member. Fill the front final drive assembly with differential gear oil after installation. Rotate the drive pinion back and forth 2 to 3 times to check for unusual noise and rotation malfunction.
Manual Cover
General