Manual Description
When the wiper arms reach the base of windshield, front wiper motor terminals 6 and 1 are connected. With ground supplied, the front and rear washer motor is operated in the front direction. Check continuity between front wiper motor harness connector terminal 1 and ground.
Adjust front wiper arms on wiper motor pivot shafts to obtain above specified blade clearances. If not satisfied with washer fluid spray coverage, confirm that the washer nozzle is installed correctly. If the washer nozzle is installed correctly, and the washer fluid spray coverage is not satisfactory, replace washer nozzle.
Pinch tabs at wiper and washer switch base and slide switch away from steering column to remove. Remove washer motor (1) in the direction of the arrow as shown from washer fluid reservoir (2). With output circuit 1 power and ground supplied, the rear wiper motor operates in a counterclockwise sweep direction until auto stop switch 1 closes (full sweep position).
Manual Cover
General