Manual Description
Make sure there is no foreign material in reservoir tank, and refill with new brake fluid. Repeat this process a few times, then pause to add new brake fluid to master cylinder. With brake pedal depressed, loosen bleed valve to let the air out, and then tighten it immediately.
Inspect the brake pedal free height "H" from the lower dash panel using tool. Loosen lock nut on the input rod, then turn input rod to adjust the pedal to specified height. Disconnect the adjustable brake pedal cable from the adjustable pedal electric motor.
There should be no binding or sticking when applying or releasing the brake pedal. There should be no binding or sticking when adjusting the brake pedal forward or backward. Install brake hose by aligning with the protrusion on cylinder body, then install the union bolt and new copper washers.
Manual Cover
General