Manual Description
If the engine is already running, turn it off and allow 10 minutes before checking. After warming up engine, make sure there is no leakage of engine oil with engine running. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible.
E When removing, prepare a shop cloth to absorb any engine oil leakage or spillage. F Completely wipe off any engine oil that adheres to the engine and the vehicle. Disconnect water hoses, pinching hoses near oil cooler to prevent engine coolant from spilling.
Check oil cooler for clogging by blowing compressed air through engine coolant inlet. If replacement is necessary, remove the valve by prying it out using a suitable tool. A Tighten the connecting bolt after aligning the stopper on the oil pan side with protrusion of the oil cooler.
Manual Cover
General