Manual Description
Do not apply undercoating to any place unless specified (such as the areas above the muffler and three way catalyst which are subjected to heat). Do not undercoat the exhaust pipe or other parts which become hot. Sealant which has been applied to these areas should be smooth and free from cuts or gaps.
Care should be taken not to apply an excess amount of A sealant and not to allow other unaffected parts to come into contact with the sealant. When repairing parts damaged by an accident which might affect the vehicle structure (members, pillars, etc. Then check the pointers and gauge itself to make sure there is no free play.
When repairing and painting a portion of the body adjacent to plastic parts, consider their characteristics (influence of heat and solvent) and remove them if necessary or take suitable measures to protect them. Plastic parts should be repaired and painted using methods suiting the materials, characteristics. Instead, use a saw to avoid weakening surrounding areas due to heat.
Manual Cover
General