Manual Description
Thereafter, the daytime lights will continue to operate when the parking brake is applied. The high beam lamps are wired in series which causes them to illuminate at a reduced intensity. The combination meter then activates the appropriate turn signal indicator and audible buzzer.
Under this condition, the headlamps remain illuminated for 5 minutes unless the lighting switch position is changed. After a series of the following operations is repeated 3 times, auto active test is completed. Check continuity between the front fog lamp harness connector terminal and ground.
Disconnect the front combination lamp connector, rear combination lamp connector and license plate M lamp connector. Disconnect the front combination lamp connector or the rear combination lamp connector. Check continuity between the front combination lamp harness connectors and ground.
Manual Cover
General