Manual Description
Repeat this process a few times, then pause to add new brake N fluid to master cylinder. With brake pedal depressed, loosen bleed valve to let the air out, and then tighten it immediately. Disconnect the adjustable brake pedal cable from the adjustable pedal electric motor.
There should be no binding or sticking when applying or releasing the brake pedal. There should be no binding or sticking when adjusting the brake pedal forward or backward. L Make sure there is no interference with other parts when turning the steering wheel both clockwise and counterclockwise.
N When removing components, cover connections so that no dirt, dust, or other foreign matter gets in. Install brake hose by aligning with the protrusion on cylinder body, then install the union bolt and new copper washers and tighten to specification. Install brake tube to brake hose, then tighten the flare nut using a suitable tool.
Manual Cover
General