Manual Description
G Verify relationship between the symptom and the condition when the symptom is detected. Verify relationship between the symptom and the condition when the symptom is detected. A short circuit inspection is also required for the circuit check in the Diagnostic Procedure.
When symptom was described from the customer, refer to confirmed symptom in step 3 or 4 and check that the symptom is not detected. Low power consumption mode (sleep) - Low power consumption control is active. After that the horn sounds once and the auto active test starts.
After a series of the following operations is repeated 3 times, auto active test is completed. HI Operates the front wiper relay and front wiper high relay. Turn ignition switch ON and wait for 2 seconds or more.
Manual Cover
General