Manual Description
Keep open flames and sparks away from the work area. Ensure that the connector and resin tube do not contact any adjacent parts. Remove the fuel filler cap to release the pressure from inside the fuel tank.
If the fuel gauge indicates more than the level as shown (full or almost full), drain the fuel from the fuel tank until the fuel gauge indicates the level as shown, or less. Remove the second row LH rear seat and the third row rear seat. Remove the second and third row rear seat belt buckles mounted on the floor.
Reposition the floor carpet out of the way to access the inspection hole cover, located under the center LH rear seat. Remove the inspection hole cover by turning the retainers 90° degrees clockwise. Remove the four bolts and remove the fuel tank shield, if equipped.
Manual Cover
General