Manual Description
A short circuit inspection is also required for the circuit check in the Diagnostic Procedure. When symptom was described from the customer, refer to confirmed symptom in step 3 or 4 and check that the symptom is not detected. Low power consumption mode (sleep) - Low power consumption control is active.
After that the horn sounds once and the auto active test starts. After a series of the following operations is repeated 3 times, auto active test is completed. Turn ignition switch ON and wait for 2 seconds or more.
It is fixed to 39 until the self-diagnosis results are erased if it is over 39. It returns to 0 when a malfunction is detected again in the process. This system includes seat belt switch inputs and dual stage front air bag modules.
Manual Cover
General