Manual Description
H If engine oil becomes turbid and white, it is highly probable that it is contaminated with engine coolant. Disconnect harness connector at oil pressure switch (1), and remove oil pressure switch using a deep socket (commercial O service tool). After warming up engine, check that there is no leakage of engine oil with running engine.
If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. A Always use oil level gauge to determine the proper amount of engine oil in the engine. Warm up engine and check area around drain plug and oil filter for engine oil leakage.
Screw oil filter manually until it touches the installation surface, then tighten it by 2/3 turn (A). Remove oil pump sprocket with the following procedure: Add matching mark if necessary for easier installation.
Manual Cover
General