Manual Description
Be especially careful when welding near the resin tube. Remove fuel level sensor unit, fuel filter and fuel pump assembly A (1). Install fuel level sensor G unit, fuel filter and fuel pump assembly (1) to fuel tank.
Check the connection for damage or any foreign materials. Align the connector with the tube, then insert the connector straight into the tube until a click sound is O heard. After connecting, check that the connection is secure by following method.
Start engine and let it idle and check there are no fuel leakage at the fuel system connections. Remove insulator on vehicle side located above center and main mufflers. Move parking brake cable (1) from the lower face of fuel tank.
Manual Cover
General