Manual Description
P Off Stops transmitting the front wiper request signal to stop the front wiper operation. On Outputs the voltage to operate the rear wiper motor. Off Stops transmitting the front wiper request signal to stop the front wiper operation.
Close the hood and lift the wiper arms from the windshield. Turn the ignition switch ON, and within 20 seconds, press the driver door switch 10 times. After that the horn sounds once and the auto active test starts.
The oil pressure warning lamp starts blinking when the auto active test starts. After a series of the following operations is repeated 3 times, auto active test is completed. Hi Operates the front wiper relay and front wiper high relay.
Manual Cover
General