Manual Description
Replace clutch pedal if the height is outside the reference value. Fully depress clutch pedal and shift to the 1st gear. Push the pedal pad by hand until a resistance can be felt and check that the play A” on the upper surface of the pedal pad is within the reference value.
Replace clutch pedal if the play is outside the reference value. Loosen clutch interlock switch by turning it 45 degrees counterclockwise. Press the clutch interlock switch (1) to bring clearance C” between the thread end of clutch interlock switch and stopper rubber (2) to the specified value while clutch pedal is fully depressed.
If it spills, wipe up immediately and wash the affected area with water. Slide bleeding connector (1) in the direction of the arrow as shown in the figure. Depress clutch pedal to gradually discharge clutch fluid.
Manual Cover
General