Manual Description
The driver air bag always remains enabled and is not affected by the passenger air bag deactivation switch. Use a scraper to remove all traces of old liquid gasket from mating surfaces and grooves. Apply a continuous bead of liquid gasket to mating surfaces.
ST 쐌 For oil pan, be sure liquid gasket diameter is 3. Apply liquid gasket around the inner side of bolt holes (unless BT otherwise specified). Assembly should be done within 5 minutes after coating.
Wait at least 30 minutes before refilling engine oil and engine HA coolant. Start engine and warm it up to normal operating temperature. Check oil pressure with engine running under no-load.
Manual Cover
General