Manual Description
The vehicle may be equipped with a passenger air bag deactivation switch which can be operated by the customer. The reading on the gauge is based on the resistance of the fuel level sensor unit. The voltage is supplied E to combination meter terminals 34 and 35 from vehicle speed sensor terminals 1 and 2.
F The unified meter control unit converts the voltage to the vehicle speed and displays it on the speedometer. Indication of each meter/gauge should be as shown in figure at left while pushing odo/trip meter switch. Check continuity between combination meter harness connector M39 terminal 46 and ground.
The indicated temperature on the thermometer is not readily affected by engine heat. Cool down the ambient air temperature sensor with water or ice, so that the indicated temperature drops. Pushing the Mode switch for about 10 seconds will enter the initial correction mode.
Manual Cover
General