Manual Description
After 30 minutes or more have passed from the installation, fill the engine with the specified oil and coolant. Insert Tool between the cylinder block and oil pan, and separate the oil pan from the engine block by tapping (1) with a plastic hammer as shown. Use a scraper to remove the old liquid gasket from the mating surface of the oil pan.
When installing chain tensioners or other sliding parts, lubricate contacting surfaces with new engine oil. Apply new engine oil to bolt threads and seat surfaces when installing camshaft sprockets and crankshaft pulley. Remove the rocker cover, loosen and remove the rocker cover bolts in the numerical order as shown.
Put paint marks on the timing chain, matching them with the timing marks on the cam sprockets and idler sprocket. If not removing the lower cover, support lower timing chain using a suitable tool to prevent the chain tensioner spring from coming out. Drain the coolant by removing the cylinder block drain plug and opening the radiator drain cock.
Manual Cover
General