Manual Description
If the cause is insufficient clearance between components: – Separate components by repositioning or loosening and retightening the component, if possible. Operate the vehicle under the same conditions as when the noise originally occurred. If you saturate the area with silicone, you will not be able to recheck the repair.
The instrument panel repair and isolation procedures also apply to center console. A loose license plate or bracket Most of these incidents can be repaired by adjusting, securing, or insulating the items(s) or components(s) causing the noise. These conditions should be duplicated when verifying and isolating the cause of the noise.
Most of these incidents can be repaired by repositioning the component K or applying urethane tape to the contact area. Underhood Some interior noises may be caused by components under the hood or on the engine wall. Hood striker out of adjustment These noises can be difficult to isolate since they can not be reached from the interior of the vehicle.
Manual Cover
General