Manual Description
If the daytime light control unit receives a ground signal from the generator, the daytime lights will not be illuminated. The daytime lights will illuminate once a battery positive voltage signal is sent to the daytime light control unit from the generator. With power and ground supplied, the high beam headlamps and high beam indicator illuminate.
F Because the high beam headlamps are now wired in series, they operate at half illumination. Lighting switch operations other than the above are the same as conventional light systems. Using adjusting screw, adjust front fog lamps so that the top edge of the high intensity zone is 100 mm (4 in) below the height of the fog lamp centers.
When performing adjustment, if necessary, cover the headlamps and opposite fog lamp. Remove mounting bolt and remove lens and housing assembly from front bumper cover. With power and ground supplied, the combination flasher unit controls the flashing of the hazard warning lamps.
Manual Cover
General