Manual Description
Operate the vehicle under the same conditions as when the noise originally occurred. If you saturate the area with silicone, you will not be able to recheck the repair. Front or rear windshield touching headliner and squeaking Again, pressing on the components to stop the noise while duplicating the conditions can isolate most of these incidents.
E These conditions should be duplicated when verifying and isolating the cause of the noise. Most of these incidents can be repaired by repositioning the component or applying urethane tape to the contact area. Hood striker out of adjustment These noises can be difficult to isolate since they can not be reached from the interior of the vehicle.
The best method is to secure, move or insulate one component at a time and test drive the vehicle. Repair can usually be made by moving, adjusting, securing, or insulating the component causing the noise.
Manual Cover
General