Manual Description
When tightening nuts and bolts, as a basic rule, equally tighten in several different steps starting with the ones in center, then ones on inside and outside diagonally in this order. When replacing and reassembling parts with dowel pins, make sure that dowel pins are installed in the original position. Carefully check engine oil or engine coolant passages for any restriction and blockage.
In areas where Tool is difficult to use, use plastic hammer to lightly tap the parts, to remove it. Using scraper, remove old liquid gasket adhering to the gasket application surface and the mating surface. Thoroughly clean the mating surfaces and remove adhering moisture, grease and foreign materials.
Apply liquid gasket without breaks to the specified location with the specified dimensions. If there is a groove for liquid gasket application, apply liquid gasket to the groove. C After 30 minutes or more have passed from the installation, fill engine oil and engine coolant.
Manual Cover
General