Manual Description
Replace the drive belts if found damaged or if the auto belt tensioner reaches the maximum limit. The owner need not perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Make sure that the indicator (fixed side) of the drive belt auto-tensioner is within the possible use range (moving side).
When the new drive belt is installed, the indicator (fixed side) should be within the range A. If the indicator (fixed side) is out of the possible use range or the drive belt is damaged, replace the drive belt. Open the radiator drain plug at the bottom of the radiator, and remove the radiator filler cap.
This is the only step required A when partially draining the cooling system (radiator only). Disconnect the upper heater hose at the engine side and apply moderate air pressure [103. When draining all of the coolant in the system, remove the reservoir tank and drain the coolant, then clean the reservoir tank before installation.
Manual Cover
General