Manual Description
Check service records for any recent repairs that may indicate a related malfunction, or a current need for scheduled maintenance. Start engine and warm it up until engine coolant temperature indicator points the middle of gauge. Rev engine (2,000 to 3,000 rpm) two or three times under no load, then run engine at idle speed for about 1 minute.
Rev engine (2,000 to 3,000 rpm) two or three times under no load, then run engine at idle speed for about G 1 minute. Make sure that throttle valve moves during above 10 seconds by confirming the operating sound. Learning will be cancelled if any of the following conditions are missed for even a moment.
Rev up the engine two or three times and make sure that idle speed and ignition timing are within the H specifications. Rev up the engine two or three times and make sure that idle speed and ignition timing are within the specifications. These conditions are determined by input signals (for engine speed and intake air) from both the crankshaft position sensor and the mass air flow sensor.
Manual Cover
General