Manual Description
If the fuel gauge indicates E more than the level as shown (half tank), drain the fuel from the fuel tank until the fuel gauge indicates the level as shown, or less. Disconnect the fuel filler hose from the fuel filler pipe. Insert a suitable hose into the fuel tank through the fuel filler hose to drain the fuel from the fuel tank.
Remove the fuel tank strap bolts while supporting the fuel tank L with a suitable lift jack. Lower the fuel tank using a suitable lift jack to access the top of the fuel level sensor, fuel filter, and fuel pump assembly. Lower the fuel tank using a suitable lift jack and remove it from the vehicle.
M Connect the quick connector as follows: - Check the connection for any damage or foreign materials. O - Visually inspect the connector to make sure the two retainer tabs are securely connected. Turn the ignition switch ON but do not start engine, then check the fuel pipes and hose connections for leaks while applying fuel pressure to the system.
Manual Cover
General