Manual Description
Check continuity between the combination switch (wiper and washer switch) terminals. Check voltage between combination switch (wiper and washer switch) harness connector and ground. This system includes seat belt switch inputs and dual stage front air bag modules.
Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. Adjust front wiper arms on wiper motor pivot shafts to obtain above specified blade clearances. Remove wiper frame bolts, disconnect wiper motor connector and remove wiper frame assembly.
Remove clip, then remove washer fluid reservoir filler neck from washer fluid reservoir. Pinch tabs at wiper and washer switch base and slide switch D away from steering column. Lift level sensor out of washer fluid reservoir in the direction of the arrow as shown.
Manual Cover
General