Manual Description
In order for the compass to operate properly (accurately) in a particular zone, the zone variation must be calibrated using the following procedure. Press the (N) or mode switch repeatedly until the desired zone number appears in the display. Once the desired zone number is displayed, stop pressing the (N) or mode switch and the display will show a compass direction after a few seconds.
Check voltage between combination meter harness connector M24 terminals 3, 16 and ground. Check continuity between combination meter harness connector M24 terminals 13, 23 and ground. Check continuity between combination meter harness connector and fuel level sensor unit and fuel pump harness connector.
Check continuity between fuel level sensor unit and fuel pump harness connector and ground. J 1 - 39: Displayed if any previous malfunction is present when current condition is normal. Compass does not show all the directions, bridges, subways, concentrations of H one or more is missing.
Manual Cover
General