Manual Description
Remove the adjuster hole plug installed on the disc rotor. Turn the adjuster in direction (A) using a suitable tool as shown, until disc rotor is locked. Turn the adjuster in the opposite direction by 5 or 6 notches after locking.
When replacing brake cable, operate parking brake lever 10 or more times with a full stroke of 229. Release the parking brake lever and rotate the disc rotor to make sure there is no drag. Rotate adjusting nut to adjust lever stroke to specification.
Lever stroke : 6 − 8 notches [under force of 196 N (20. With parking brake lever completely disengaged, make sure there is no drag on the parking brake. Remove the right and left rear cables from the equalizer.
Manual Cover
General