Manual Description
When removing dirt, do not use any abrasives, a wire brush, or other items that may scratch the coating. M After driving on roads scattered with anti-icing salts, wash off the wheels completely. Rotate wheel and check dial indicators at several points around the circumference of the wheel.
If a balancer machine only has the clip-on (rim flange) weight mode setting, follow Step 2. When inner and outer imbalance values are shown on the balancer machine indicator, multiply outer imbalance value by 5/3 (1. Select the outer balance weight with a value closest to the calculated value above and install in to the designated outer position of, or at the designated angle in relation to the road wheel.
Indicated imbalance value × 5/3 = balance weight to be installed Calculation example: 23 g (0. Lubricate the tire outside bead well with a suitable non-silicone lubricant, and remove outside of tire from the road wheel. Lubricate the tire inside bead well with a suitable non-silicone lubricant, and remove inside of tire from the road wheel.
Manual Cover
General