Manual Description
This system includes seat belt switch inputs and dual stage front air bag modules. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. For approximately three minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy.
Also check the air bag diagnosis sensor unit for cracks, deformities or rust before installation and replace as required. Always place driver and front passenger air bag modules with the pad side facing upward and seat mounted front side air bag module standing with the stud bolt side facing down. Before performing any of the following steps, ensure that all vehicle body and structural repairs have been completed.
Remove the front air bag modules, crash zone sensor assembly, bracket and seat belt pre-tensioner assemblies. Install new front air bag modules, crash zone sensor assembly, bracket and seat belt pre-tensioner assemblies. After the work is completed, perform self-diagnosis to check that no malfunction is detected.
Manual Cover
General