Manual Description
With the clevis pin removed, manually move the clutch pedal up and down to determine if it moves freely. Check clutch hydraulic and system components (clutch master cylinder, clutch operating cylinder, clutch withdrawal lever and clutch release bearing) for sticking or binding. Connect a transparent vinyl tube and container to the air bleeder valve on the clutch operating cylinder.
Remove the snap pin and clevis pin from the clevis, and separate it from the clutch pedal. Remove the clutch master cylinder nuts, and remove the clutch master cylinder from the vehicle. If (L) is outside standard length, adjust the position of the clevis and push rod.
Remove the operating cylinder bolts, and remove the operating cylinder from the vehicle. I When installing the clutch hose to the bracket, align the clutch hose metal fittings with the bracket positioning emboss, then install the lock plate to secure. Remove the release bearing sleeve assembly, holder spring, and withdrawal lever from inside the clutch housing.
Manual Cover
General