Manual Description
Remove the old liquid gasket adhering to the gasket application surface and the mating surface using suitable tool. O Remove the liquid gasket completely from the groove of the liquid gasket application surface, bolts, and bolt holes. Thoroughly clean the mating surfaces and remove adhering P moisture, grease and foreign material.
Apply the liquid gasket without breaks to the specified location with the specified dimensions. Make sure that the auto-tensioner indicator is within the allowable working range. If the indicator is out of allowable working range or drive belt is damaged, replace the drive belt.
The drive belt tension is automatically adjusted by the drive belt auto-tensioner. Make sure that the valve clearances for cold engine are within specifications by referring to the specified values. When the gauge pointer stabilizes, read the compression pressure and the engine rpm.
Manual Cover
General