2012 Nissan Juke Repair Manual - Brake System (Section BR)

2012 Nissan Juke Repair Manual - Brake System (Section BR)
Posted on 24 May, 2015
Model: 2012 Nissan Juke
Pages: 58


File size: 1 MB

Download Manual

Manual Description
Disconnect the stop lamp switch and brake pedal position switch harness connector. Adjust the clearance between the brake pedal lever and the stop lamp switch and brake pedal position switch threaded end after adjusting the brake pedal height. Press-fit the stop lamp switch (2) until the stop lamp switch hits the brake pedal lever (1) 45° clockwise while pulling the brake pedal pad slightly.

Press-fit the brake pedal position switch (2) until the brake pedal B position switch hits the brake pedal lever (1) 45° clockwise while pulling the brake pedal pad slightly. Depress the brake pedal with a force of 785 N (80 kg, 176 lb) and hold down the pedal for approximately 5 seconds with the engine running. Check that there is no foreign material in the reservoir tank, and refill with new brake fluid.

Loosen the bleeder valve, slowly depress the brake pedal to the full stroke, and then release the pedal. C Repeat this operation at intervals of 2 or 3 seconds until new brake fluid is discharged. Loosen the bleeder valve and bleed air with the brake pedal depressed, and then quickly tighten the I bleeder valve.


Manual Cover
2012 Nissan Juke Repair Manual - Brake System (Section BR) Image


General
Year 2012
Make Nissan
Model Juke
Language English
Pages 58
Filetype PDF (Download)
File size 1 MB



Nissan Juke Models

Privacy Policy    Contact us