Manual Description
Fill radiator with water until water spills from the air relief hole, then close air relief plug. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. Always use the dipstick to determine when the proper amount of oil is in the engine.
The oil filter is a small full-flow cartridge type and is provided with a relief valve. Screw in the oil filter until a slight resistance is felt, then tighten additionally 2/3 turn. Loosen ignition coil fixing bolts and pull out coil from intake manifold connector.
When inner and outer unbalance values are shown on the wheel balancer indicator, multiply outer unbalance value by 1. I Before installing the balance weight, be sure to clean the mating surface of the road wheel. When installing balance weight to road wheels, set it into the grooved area on the inner wall of the road wheel as shown in the figure at left so that the balance weight center is aligned with the wheel balancer indication position (angle).
Manual Cover
General