Manual Description
Use the jack to support and lower the rear suspension member assembly for removal. Set a suitable jack on the rear lower link to remove the lower shock absorber nut and bolt using power J tools. Remove the two suspension arm nuts and bolts from the suspension member side of the suspension arm using power tools.
Remove the front lower link nut and bolt from the knuckle side and the adjusting bolt and nut from the suspension member side using power tools. Remove the upper rubber seat, coil spring, and lower rubber seat from the rear lower link. A Check that the projection part outside the upper rubber seat is directed toward the front of the vehicle.
Position the hollow of the lower rubber seat with the groove part B of the rear lower link. Install the coil spring so that the side with the two paint markers is directed toward the lower side. Check the piston rod for cracks, deformation, or other damage and replace if necessary.
Manual Cover
General