Manual Description
M Cover the open end of lines and hoses when disconnecting to prevent entrance of dirt. Remove the flare nut connecting the brake tube and hose, then withdraw the lock spring. Remove the connecting bolt and disconnect the brake hose from the caliper assembly.
Remove lock springs from the mounting portion of the brake tube and the mounting portion of the strut. Attach the brake hose to the caliper assembly, then temporarily tighten the connecting bolt by hand. Attach the brake hose to the brake tube and temporarily tighten the flare nut as much as possible by hand, then secure it with a lock spring.
Cover the open end of lines and hoses when disconnecting to prevent entrance of dirt. Attach the brake hose to the brake tube and temporarily tighten the flare nut as much as possible by hand. Apply a stepping force of 784 N (80 kg-f, 176 lb-f) to the brake pedal with the engine running and keep it for about 5 seconds, then check each part for leaks.
Manual Cover
General