Manual Description
Use of a vacuum assist or B power bleeder will not purge all the air from the system. Connect a transparent vinyl tube and container to the air bleeder valve on the clutch operating cylinder. Repeat steps 3 through 5 until clear brake fluid comes out of the air bleeder valve.
Perform steps 1 through 6 for bleeding air from the air bleeder valve on the bleed connector. Remove the clutch master cylinder nuts, then remove the clutch master cylinder from the vehicle. If measurement is outside standard length, adjust position of clevis and push rod.
Connect the clutch line to the master cylinder assembly, and hand-tighten the flare nut. Install clutch reservoir tank hose and hose clamp to the clutch master cylinder assembly. Tighten the clutch line flare nut to specification using a flare nut torque wrench.
Manual Cover
General