Manual Description
Do not use too much force when removing clips and fasteners, otherwise clips and fasteners can be broken or lost during the repair, resulting in the creation of new noise. Feeling for a vibration with your hand by touching the component(s) that you suspect is (are) causing the noise. Placing a piece of paper between components that you suspect are causing the noise.
If the cause is insufficient clearance between components: – Separate components by repositioning or loosening and retightening the component, if possible. Operate the vehicle under the same conditions as when the noise originally occurred. If you saturate the area with silicone, you will not be able to recheck the repair.
Front or rear windshield touching headliner and squeaking Again, pressing on the components to stop the noise while duplicating the conditions can isolate most of these incidents. Most of these incidents are repaired by pushing up on the console at the clip locations until the clips engage. These conditions should be duplicated when verifying and isolating the cause of the noise.
Manual Cover
General