Manual Description
If its condition is questionable, use circuit tester or test lamp. In such a case, carefully check and eliminate cause of incident. Never let fusible link touch any other wiring harness, vinyl or rubber parts.
Each control unit can transmit and receive data, and reads necessary information only. Close hood and front door RH, and lift wiper arms away from windshield (to prevent glass damage by wiper operation). When auto active test mode is actuated, horn chirps once.
After a series of operations is repeated three times, auto active test is completed. Remove 2 bolts and position coolant reservoir aside. Find the desired connector number on the connector list.
Manual Cover
General