Manual Description
Operate the vehicle under the same conditions as when the noise originally occurred. If you saturate the area with silicone, you will not be able to recheck the repair. Most of H these incidents are repaired by pushing up on the console at the clip locations until the clips engage.
These conditions should be duplicated when verifying and isolating the cause of the noise. Most of these incidents can be repaired by repositioning the component M or applying urethane tape to the contact area. Hood striker out of adjustment These noises can be difficult to isolate since they cannot be reached from the interior of the vehicle.
The best method is to secure, move or insulate one component at a time and test drive the vehicle. Repairs can usually be made by moving, adjusting, securing, or insulating the component causing the noise. Separate the combination meter from the instrument panel and disconnect the harness to remove.
Manual Cover
General