Manual Description
Check continuity between generator harness connector F7 (A) terminal 4 and ground. Confirm repair by performing complete Starting/Charging system test. Check voltage between battery positive terminal and generator connector F6 terminal 1.
NO >> Check harness between battery and generator for high resistance. If the charge warning lamp illuminates with the engine running, a malfunction is indicated. Terminal 3” circuit detects the battery voltage to adjust the generator output voltage with the IC regulator.
NO >> Check harness for open between generator and fuse. The charging warning lamp turns ON when increasing the engine speed. This system includes seat belt switch inputs and dual stage front air bag modules.
Manual Cover
General