Manual Description
For additional information about wiper operation under this condition. If the switch is held in the mist position, low speed operation continues. After ignition switch is turned off and turned on again, if wipers stop at the different position, fail-safe returns the wipers automatically to the proper position and then stops.
It reads 20 types of switch data and 5 types of diagnosis data. Therefore, a delay occurs between the switch becoming ON and operation of the electric load. Operating Modes The following operation modes exist for combination switch reading function.
Each control unit transmits/receives data but selectively reads required data only. Understand operation description and function description. Check symptom and repair or replace the cause of malfunction.
Manual Cover
General