Manual Description
D When removing, prepare a shop cloth to absorb any engine oil leakage or spillage. Screw oil filter manually until it touches the installation surface, then tighten it by 2/3 turn. When removing oil cooler only, pinching water hoses near oil cooler to prevent engine coolant spilling.
If replacement is necessary, remove D relief valve by prying it out with suitable tool. Make sure that no foreign objects are adhering to the installation surfaces of oil cooler and oil pan (upper). Align cutout on oil cooler with protrusion on oil pan (upper) side, F and tighten connector bolt.
Check the engine oil level and the engine coolant level and add engine oil and engine coolant. After removing regulator valve plug, remove regulator valve spring and regulator valve.
Manual Cover
General